UHE 2850 Multi (600712420) 1 1/8" Multi-hammer

Plastic Carry Case; with Metabo Quick Chuck

Order no.: 600712420 EAN: 4007430234636
Max. single blow energy (EPTA):
2.8 J
Maximum impact rate:
4400 BPM
Rated input power:
1010 W
Drill-Ø concrete with hammer drills:
1 1/8 "
Bit retainer:
SDS-plus
  • Multi-hammer for hammer drilling, drilling without impact in two speeds and chiseling
  • Metabo Quick: Quick change between SDS Plus hammer chuck and keyless chuck for drilling in wood and metal
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customized speeds to suit the application material and speeds that remain almost constant, even under load
  • Two-speed gear unit: two drilling speeds for effective drilling in wood and metal
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Multi-hammer for hammer drilling, drilling without impact in two speeds and chiseling
  • Metabo Quick: Quick change between SDS Plus hammer chuck and keyless chuck for drilling in wood and metal
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customized speeds to suit the application material and speeds that remain almost constant, even under load
  • Thumbwheel for Speed Preselection and Impact Rate
  • Two-speed gear unit: two drilling speeds for effective drilling in wood and metal
  • Metabo Long-life motor with dust protection for long service life
  • High performance hammer action, precisely mounted in a housing made of aluminum alloy: long-lasting and robust
  • Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly.
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Wear indication for carbon brushes
  • Cable-protecting ball joint for the best freedom of motion when working
Parameters
Max. single blow energy (EPTA)
2.8 J
Amps
9 AMPS
Maximum impact rate
4400 BPM
Rated input power
1010 W
Drill-Ø concrete with hammer drills
1 1/8 "
Drill-Ø masonry with core bits
2 5/8 "
Drill Ø steel
1/2 / 1/4 "
Drill-Ø soft wood
1 1/8 / 1 1/8 "
No-load speed
0 - 950 / 0 - 2500 RPM
Revolutions at rated load
860 / 2250 RPM
Torque
115 / 115 in-lbs
Bit retainer
SDS-plus
Collar diameter
1 31/32 "
Weight (without power cable)
8.2 lbs
Cable length
13 ft
Vibration
Drilling in metal
5 m/s²
Uncertainty of measurement K
1.5 m/s²
Hammer drilling concrete
13 m/s²
Uncertainty of measurement K
1.5 m/s²
Chiseling
8.5 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
88 dB(A)
Sound power level (LwA)
99 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Hammer chuck for tools with SDS-plus shank end
  • Keyless chuck for tools with cylindrical shank end
  • rubber-coated handle
  • Drilling depth guide
  • Plastic carrying case