KHE 76 (600341420) 2" Combination hammer

Plastic Carry Case

Order no.: 600341420 EAN: 4007430179906
Max. single blow energy (EPTA):
11.9 J
Maximum impact rate:
2735 BPM
Rated input power:
1500 W
Max. capacity in concrete with hammer drills:
2 "
Bit retainer:
SDS-max
  • Combination hammer chuck for hammer drilling and chiseling.
  • Metabo VibraTech (MVT) vibration absorber: The spring-mounted anti-vibration mass reduces vibrations by more than 30%.
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customized speeds to suit the application material and speeds that remain almost constant, even under load
  • Optional 30% impact reduction setting for working with more pliant materials
  • Electronic soft start for precise spot-drilling
  • Combination hammer chuck for hammer drilling and chiseling.
  • Metabo VibraTech (MVT) vibration absorber: The spring-mounted anti-vibration mass reduces vibrations by more than 30%.
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customized speeds to suit the application material and speeds that remain almost constant, even under load
  • Optional 30% impact reduction setting for working with more pliant materials
  • Electronic soft start for precise spot-drilling
  • Optimum heat dissipation and low weight thanks to magnesium die cast gear housing
  • Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly.
  • The service display, for example, indicates when the carbon brush needs to be replaced, plus an LED indicating mains voltage
  • Metabo VibraTech (MVT) side handle for vibration damping to protect the user's health
Parameters
Max. single blow energy (EPTA)
11.9 J
Amps
15 AMPS
Maximum impact rate
2735 BPM
Rated input power
1500 W
Max. capacity in concrete with hammer drills
2 "
No-load speed
0 - 300 RPM
Torque
885 in-lbs
Bit retainer
SDS-max
Collar diameter
2 19/32 "
Weight (without power cable)
18.5 lbs
Cable length
20 ft
Vibration
Hammer drilling concrete
9.7 m/s²
Uncertainty of measurement K
1.5 m/s²
Chiseling
9.7 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
96 dB(A)
Sound power level (LwA)
107 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Metabo VibraTech (MVT) side handle
  • Drilling depth guide
  • Lubricant for tool shank end
  • Duster
  • Plastic carrying case
Metabo uses cookies in order to optimize and continually improve the design of our website. By continuing to use our website, you consent to the use of cookies. More information